Thermwood Corporation - First in CNC Router

LSAM > Print Heads

LSAM with standard 40mm Melt Core
40mm Standard LSAM Melt Core

Advanced LSAM Print Heads

LSAM machines use new, Thermwood developed “Universal” design print heads that can be equipped with any of three interchangeable “Melt Cores”.

The print head is large by industry standards, being over 10 feet long and weighing one and a half tons, but despite the size and weight it moves at speeds up to five feet per second. The print head is designed so that the “Melt Core”, which consists of a feed housing, extruder and polymer melt pump, can be changed should higher or lower print rates be required.

LSAM is DIfferent Than Other Thermoplastic 3D Printers

The print head is a critical element in Thermwood’s additive manufacturing process which functions differently than other FDM thermoplastic 3D printers. Most thermoplastic additive manufacturing systems print with a relatively small print bead onto a heated table in a heated environment. The heated environment is needed to keep newly printed layers from getting too cool to properly fuse with subsequent layers.

In Thermwood’s approach, the only heat source is the print head itself. A heated environment isn’t required. The process prints a large bead at such high output rates that the printed layer must be cooled rather than heated to achieve the proper layer to layer fusing temperature. The entire process is essentially an exercise in controlled cooling and produces large size, high quality, virtually void free printed structures.

Each layer is printed at a rate that allows it to cool to the ideal temperature before the next layer is applied. If the layer becomes too hot, print speed is reduced to allow more cooling time. If it becomes too cool, print speed is increased to reduce cooling time. 

Real-Time Thermographic Image Display

Real-Time LSAM Thermographic Image Display
Real-Time LSAM Thermographic Image Display

A built-in thermographic imaging system displays a real time thermal image on the CNC control screen which aides the operator in achieving and maintaining the ideal print temperature during the print process.

Temperature Control Module Integrated into LSAM

Temperature Control Module Integrated into LSAM
Temperature Control Module Integrated into LSAM

The LSAM Universal Print Head can process material at temperatures up to 450oC. It uses an electronic temperature control module integrated within the print gantry CNC control, allowing full integration of temperature and pressure control with exclusive features of Thermwood’s print gantry CNC control, better supporting processes unique to 3D printing.

Three Melt Core Choices for LSAM

Thermwood offers three melt cores for its print head, each with a different maximum print rate. The maximum print rate determines the longest bead that can be printed during the available cooling time between layers.  This cooling time varies depending on material, amount of fan cooling and geometric shape of the layer, but the faster the print rate the more material that can be laid down within the cooling time between layers, so faster print heads allow larger parts to be printed, but don’t really print parts faster.

Fastest Printing With LSAM

Even the standard 40mm LSAM melt core is generally so fast that it must be slowed on most parts to keep from printing a layer so fast that it doesn’t have sufficient time to cool properly between layers. In this case, often multiple parts can be printed in the same time it takes to print just one.

The LSAM machine is equipped with a standard 40mm Melt Core which includes a patented 40mm high speed extrusion screw coupled to a corresponding melt pump and deposition head. This standard configuration processes over 200 pounds of material an hour, depending on the specific material and is suitable for parts that have a print layer lap length of up to 200 feet while printing a standard bead that is .200 inch thick and .830 inch wide. This configuration has proven more than adequate for virtually all large parts today.

If even longer layer bead lengths are required, higher output Melt Cores are available. A 60mm Melt Core can process 50% more and a 70mm Melt Core has operated at rates of over 500 pounds per hour, which Thermwood expects to increase.

The fastest speed at which a part can be printed is determined by the cooling time required to reach the proper bonding temperature between layers and not by the output of the print head. Larger print head outputs simply allow larger parts to be printed within the cooling time between layers.

High output melt cores do, however, have a minimum operating speed so may not be suitable for smaller parts. If both small and really large parts are required on the same machine, the melt core can be changed from one size to another in less than a shift. 

Universal Print Head Installed on LSAM Development Machine

Thermwood has installed a universal print head on its current 10’ x 10’ LSAM development machine with a 40mm Melt Core and has successfully printed composite tooling masters from 20% Carbon Fiber filled ABS, and has printed actual autoclave tooling from both 50% Carbon fiber filled PPS and 20% Carbon Fiber filled Ultem using this print head. 

Request More Information on LSAM